The Art of Measurement: SurroundMonitor 11900 Series
SurroundMonitor 11900 series is RTW‘s prime solution using external displays for measuring and analyzing multi-channel and surround sound audio programs. It meets top-level demands in terms of functionality, channel count, system integration and networking. An intelligent signal ident analyzer supporting BLITS, integrated SPL metering and up-to-date loudness measurement conforming to current standards (EBU R128, ITU-R BS.1770-3/1771, ATSC A/85 and ARIB) are just a few of the instruments available in the 11900
For Loudness measurements with version 4, additional extensive functions are available. For example, the LRA instrument combines the measurement and visualization of two critical loudness parameters (program loudness, loudness variances within short time periods) in a straightforward and intuitive way.
The 3G/HD/SD-SDI deembedder interface option expands the audio signal analysis to 3G-SDI data streams and surround format 7.1 DD+. Depending on the model SurroundControl is already equipped with it. All delivered version 4 units can be upgraded by factory (--> see Options). For existing units with software version 3 (03.00.nn) an upgrade kit to version 4 is available.
- For 5.1, 6.1 and 7.1 surround, multi-channel and 2-channel stereo
- Extended functions for loudness and SPL measurement
- 8-channel analog and digital inputs
- Multi-norm Peak Program Meter with loudness display
- True Peak metering
- Comfortable Loudness measurements acc. to EBU R128, ITU-R BS.1770-3/1771, ATSC A/85, and ARIB
- Additional customer mode to adapt Loudness measurements to individual needs
- Summed Loudness display for Momentary ("M"), Shortterm ("S"), and Integrated ("I") Loudness
- LRA instrument with unique "MagicLRA" and
"MagicLRA + I" modes for the intuitive detection of Loudness Range and Integrated ("I") Loudness values
- Numerical display of all relevant Loudness values
- Surround Sound Analyzer with displays for total program volume, balance of front/center/rear, and phantom sound sources
- Multi-correlation display with LFE mode for all surround formats
- Separate 2-channel downmix meter with vectorscope and correlator for Lo/Ro or external signals
- Extended BLITS/EBU channel identification with intelligent analyzer
- 1/3 and 1/6 octave spectrum analyzer (RTA)
- Dialnorm meter, AES/EBU status monitor
- Sound level meter function, measuring microphone connection, test signal generator
- VGA monitor output for connecting a TFT monitor
- Optional 8.4“ VGA monitor with control keys (Remote Display 30010, not included in delivery)
- Extended versions with factory installed 3G/HD/SD-SDI deembedder or/and Dolby® E/Dolby® AC-3 decoder available
Main unit in a 19"/1U case for external VGA displays with analog and digital standard inputs and digital outputs, control keys on the front for easy operation
same as 11900, but fitted with 3G/HD/SD SDI deembedder interface and Dolby® E / Dolby® AC-3 decoders, extended signal routing options and instruments
The Loudness Meter (right, marked with white frame) acc. to current guidelines (EBU R128, ITU-R BS.1770/1771, ATSC A/85, ARIB) shows from left to right three channel groups: the first group displays the RLB weighted loudness for each channel with additional True Peak bargraphs, the second group displays the summed momentary loudness of all channels ("M"), the integrated mean momentary value for a dynamic time period (shortterm "S"), and the loudness value of an integrated longterm reading ("I"), the third group displays the new LRA instrument in "MagicLRA + I + Num" mode.
The Surround Sound Analyzer (House display, above left, marked with a white frame) is a powerful tool for visualizing the interaction of all important parameters of surround signals. The dynamic behaviour of all display elements corresponds to the subjective listening impression, enabling you to see the balance of a surround programme intuitively and at a glance.
The Audio Vectorscope (above left, marked with a white frame) is a high quality Lissajous display for stereo signals available in surround modes and for all modes with stereo channel pairs showing the phase relationship of two channels in real time. Additionally, a corresponding phase meter is displayed.
The Multi-Correlator (above left, marked with a white frame) is a mulit-fold display mode with up to ten phase meters for all possible channel pairs, graphically placed inside a 5.1 speaker setup. To obtain a view of the "surround envelopment" effect an optional 300 Hz low pass filter can be activated.
The 1/3 octave Real Time Analyzer (left, marked with a white frame) displays the spectral distribution of individual channels or channel groups using 31 bands with 1/3 octave intervals and an additional HF band. Additional functions for easy evaluation: peak hold, display hold, band cursor and cursor readout.
The 2-Channel Downmix Meter (above left, marked with a white frame) displays the levels and the correlation of the internally generated two-channel downmix signal. The instrument also features an audio vectorscope. The downmix signal can be generated just for display use, e. g. to check the effect of an external downmix that might be performed later. In addition, the downmix generated internally can as well be supplied through the digital output connectors as a direct signal.
The Calibration Instrument (above left, marked with a white frame) with SPL bargraph (right) provides an 8-channel test signal generator with sine wave signals or pink noise with a variety of bandwidths and level, and an SPL meter with a calibration microphone preamplifier for calibrating the sound monitoring system. Called up from the SPL meter, the RTA 1/6 is available automatically using the measuring microphone input.
The BLITS 5.1 Surround Identification Instrument (BLITS: Black's and Lane's Ident Tones for Surround, above left, marked with a white frame) is an intelligent analyzer for incoming BLITS sequences showing the signal states and marking conspicuous channel swapping, level differences, phase shifts, delays and polarity issues. For identification an prevention of unintentional channel swapping an integrated signal generator also supplies a BLITS signal cluster that can be routed directly to the outputs.
Upgrade Kit for the upgrade of existing 11900 units working with software version 03.00.nn to the new version 4. Includes a new DSP board, software files for version 4 and a detailed instruction for the exchange of the board and the installation of the software.
3G/HD/SD-SDI deembedder option for SurroundMonitor 11900 (version 4) resp. 3G-SDI upgrade for existing 11900S and 11900SD with version 4 (extension by factory). For units with software version 03.00.nn a hardware upgrade to version 4 is mandatory before.
3G/HD/SD-SDI deembedder and Dolby® E/AC-3 decoder option for SurroundMonitor 11900 (version 4) resp. 3G-SDI upgrade for existing 11900D, 11900S, and 11900SD with version 4 (extension by factory). For units with software version 03.00.nn a hardware upgrade to version 4 is mandatory before.
Remote Display. 8.4" TFT VGA display with keypad, table-stand, power supply and VGA cable.
Measurement microphone MM1: Option for calibrating the studio loudspeaker system
Panel mounting kit for Remote Display 30010
Snake cable 4 meter, distributes 25p-Sub-D to 4 x XLR-F and 4 x XLR-M (digital inputs and outputs)
Snake cable 4 meter, distributes 25p-Sub-D to 8 x XLR-F (analog inputs)
VGA connecting cable Bürklin 13M4240 type, 5 m, all pins wired, for connecting Remote Display 30010
Wide range 100 - 240 V AC/24 V DC 2.7 A, table-top power supply with corresponding power cable for different power supply systems, fits to Remote Display 30010